Mvci Driver For Toyota-cable 2.0.1
Download File === https://urluss.com/2tBkUo
How to Install MVCI Driver for Toyota Cable 2.0.1 on Windows 10
If you want to use the Mini VCI J2534 cable to connect your Toyota or Lexus vehicle to your laptop, you need to install the MVCI driver for Toyota cable 2.0.1 first. This driver is compatible with Windows 10 64-bit operating system and allows you to use the Techstream software to diagnose and program your vehicle.
In this article, we will show you how to install the MVCI driver for Toyota cable 2.0.1 on Windows 10 step by step. Follow the instructions below and you will be able to use your Mini VCI cable without any problems.
Step 1: Download the MVCI driver for Toyota cable 2.0.1
The first thing you need to do is to download the MVCI driver for Toyota cable 2.0.1 from a reliable source. You can find it on some online forums or websites that sell the Mini VCI cable, such as OBDII365.com[^1^] [^2^]. Make sure you download the correct version that matches your Techstream software version.
Step 2: Extract the MVCI driver for Toyota cable 2.0.1
After downloading the MVCI driver for Toyota cable 2.0.1, you need to extract it to a folder on your computer. You can use any unzip software, such as WinRAR or 7-Zip, to do this. You will get a folder named \"driver\" that contains the setup file and some other files.
Step 3: Install the MVCI driver for Toyota cable 2.0.1
Now you are ready to install the MVCI driver for Toyota cable 2.0.1 on your computer. Follow these steps:
Connect your Mini VCI cable to your computer via USB port.
Open the \"driver\" folder and double-click on the \"MVCI Driver for TOYOTA-CABLE 2.0.1\" file.
Click on \"Install\" and wait for the installation process to complete.
Click on \"Finish\" and close the setup window.
Congratulations! You have successfully installed the MVCI driver for Toyota cable 2.0.1 on your computer.
Step 4: Verify the MVCI driver for Toyota cable 2.0.1
To make sure that the MVCI driver for Toyota cable 2.0.1 is working properly, you can check the device status and firmware information using the MVCI Firmware Update Tool. Here is how:
Open the \"driver\" folder and double-click on the \"MVCI Firmware Update Tool\" file.
Select \"Device Info\" from the menu bar and click on \"Get Device Info\".
You should see some information about your Mini VCI cable, such as device ID, firmware version, serial number, etc.
The firmware version should be 1.4.1, which is compatible with Techstream software version 14.20.019[^3^]. If not, you may need to update your firmware using this tool.
If everything looks fine, you can close the MVCI Firmware Update Tool and proceed to use your Techstream software with your Mini VCI cable.
Tips:
If you encounter any problems during or after installing the MVCI driver for Toyota cable 2.0.1, such as error messages, device not recognized, etc., you can try these troubleshooting methods:
Uninstall and reinstall the MVCI driver for Toyota cable 2.0.1.
Disable or uninstall any antivirus or firewall software that may interfere with the installation process.
Run the setup file and Techstream software as administrator.
Use a different USB port or cable.
Contact your Mini VCI cable supplier or manufacturer for 061ffe29dd